Buу 1 gеt 1 CS Unitec 93552 PLANTEX Ceramic High Performance Flap Disc for Hard to Grind Metals, 4-1/2 Diameter, 7/8 Arbor, 80 Grit (Pack of 10) Simple review
So you can check out the other reviews at Amazon.com
only with $ 65.10
| Grit Material | Ceramic |
| Item Diameter | 4.5 Inches |
| Brand | C.S. Unitec |
| Grit Type | 80 |
| Grit Number | 80 |
- Ceramic high-performance flap disc with exceptional grinding performance for universal use on stainless steel and hard-to-grind metals
- The flexible fiber substrate of the PLANTEX backing pad provides a greater contact surface area resulting in higher material removal rates
- Discs can be changed in seconds, without tools, using the easy-lock clamping nut (not included)
- Self-trimming fiberglass free backing pad allows for 100 percent use of abrasive
- Made in Germany; 13, 200 rpm maximum speed
From the manufacturer
Strength & safety with FEM
The backing plate for the PLANTEX high-tech compound is calculated using the finite element method (FEM).
- Approved for 260 ft./sec. to DIN EN 13743
- Complies with ANSI standard B7.1
PLANTEX CERAMIC
Save labor and time – one flap disc for all metals
The PLANTEX CERAMIC high-tech compound has been specifically developed for grinding all metals including stainless steel, steel, aluminum, titanium, bronze and special alloys. Self-trimming backing pad allows for 100% use of abrasive.
- Superior material abrasion and service life due to the discs’ springy elasticity
- Self-trimming and very easy to cut
- Absorbs vibration and noise
- High strength, yet lightweight
A Quantum Leap In Flap Disc Technology
 |
 |
 |
|---|---|---|
Not All Flap Discs are the Same!These pictures show the clear difference between a CS Unitec flap disc with hard-pressed flaps (top) and a standard flap disc with fiberglass backing and unpressed flaps (bottom). In contrast to many rival products, the flaps of CS Unitec’s discs are pressed on to the backing disc over their full area – throughout the entire hardening process – to produce a solid, compact and vibration-stable abrasive. | Grinding Down to the Last Fraction of an InchThe backing plate used on PLANTEX flap discs reduces in diameter automatically during grinding. It can also be trimmed with cutting tools, a process that is simple and straightforward. The PLANTEX flap disc can be used down to the last flap of the abrading fabric – and saves you money in the process! | PLANTEX Patented Hightech CompoundThe development of the new PLANTEX high-tech compound has resulted in the production of the first flap discs in the world with a backing plate made of natural hemp, with polypropylene used to bind it. Hemp fiber high-tech compound is an almost ideal base material for flap disc backing plates – it is flexible, heat-absorbent (for low grinding temperatures), very easy to trim, safe to use and easy to dispose of. The cavities of the hemp fiber structure, in conjunction with polypropylene, have a highly insulating, damping and noise-reducing effect, thus enhancing the safety features of the discs. |
PRODUCT FEATURES
 |
 |
 |
|---|---|---|
Adjusts to the Workpiece SurfaceSuperior material abrasion and service life due to the discs’ springy elasticity. | The Clever One Gives WayThe fiber substrate of the PLANTEX high-tech compound gives it absorbent, spring-like properties that enhance grinding performance. | Greater Contact Surface AreaThis flexibility provides a greater contact surface area with the workpiece (more grit is used) that results in more material being abraded. The material removal capacity is therefore higher. The larger contact surface area also dissipates more heat, making the grinding work cooler – the workpiece does not suffer smearing and the abrasive fabric does not burn. |
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| Click Here to Learn More | Click Here to Learn More | Click Here to Learn More | Click Here to Learn More | Click Here to Learn More | Click Here to Learn More | |
| Application | Flexible flap disc for general use | Specifically developed for grinding stainless steel | Specifically developed for grinding all metals including stainless steel, steel, aluminum, titanium, bronze and special alloys | Designed for the difficult grinding of aluminum | PLANTEX SUNFIRE Ceramic Flap Discs grind, blend and Finish all with one disc | CS Unitec 65000A-Refill Plantex Flap Disc Variety Pack |
| Dimensions | Diameter: 4", 4-1/2", 5", 7" | Diameter: 4", 4-1/2", 5", 7" | Diameter: 4-1/2" and 5" | Diameter: 4", 4-1/2", 5", 7" | Diameter: 4-1/2", 5" | Diameter: 5" |
| Max. speed | 13,200 RPM for 4-1/2" diameter | 13,200 RPM for 4-1/2" diameter | 13,200 RPM for 4-1/2" diameter | 13,200 RPM for 4-1/2" diameter | 13,200 RPM for 4-1/2" diameter | 12,200 RPM for 5" diameter |
| Ideal speed | 5000 to 8000 RPM | 5000 to 8000 RPM | 5000 to 8000 RPM | 5000 to 8000 RPM | 6000 to 9000 RPM | 5000 to 8000 RPM |
| Complies with | ANSI B7.1, 260 ft./sec. DIN EN 13743 | ANSI B7.1, 260 ft./sec. DIN EN 13743 | ANSI B7.1, 260 ft./sec. DIN EN 13743 | ANSI B7.1, 240 ft./sec. DIN EN 13743 | ANSI B7.1, 260 ft./sec. DIN EN 13743 | ANSI B7.1, 260 ft./sec. DIN EN 13743 |
| Grits | 40, 60, 80, 120 | 40, 60 | 40, 60, 80 | 40, 60, 80, 120 | 40, 60 | 40, 60 |
| Arbor size | 5/8" or 7/8" | 5/8" or 7/8" | 7/8" | 5/8" or 7/8" | 7/8" | 7/8" |
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| Magnum Clean | Magnum Fleece | Magnum TopMix | Poly-Magic | FIX-Backing | FIX PUR | |
| For pore-deep cleaning of metals (sandblasting effect) | Effective at descaling and removing oxidation, scratches, rust, burrs and paint; It replaces a wire brush, abrasive paper and grinding rubbers | Ideal for removing spot welds and deep scratches on stainless steel, steel and nonferrous metals | Designed for finishing and dry polishing in corners, producing up to a perfect mirror finish in just two steps | For use with the FIX Zirconium disc, FIX TZ Pyramid disc and FIX SuperPolish disc. The backing disc is made of special elastic material with a centering pin for perfect alignment. | For use with the FIX Zirconium disc, FIX TZ Pyramid disc and FIX SuperPolish disc. The backing disc is made of flexible PUR with a special 1/4” absorption coating with a centering pin for perfect alignment. |
Product Description
The development of the new PLANTEX high-tech compound has resulted in the production of the first flap discs in the world with a backing plate made of natural hemp, with polypropylene used to bind it. In addition to excellent material abrasion and a long service life, the discs offer maximum operator safety, protection of natural resources and environmental friendliness. The fiber substrate of the PLANTEX high-tech compound gives it absorbent, spring-like properties that enhance grinding performance. This flexibility provides a greater contact surface area with the work piece (more grit is used) that results in higher material removal. The larger contact surface area also dissipates more heat, making the grinding work cooler – the work piece does not suffer smearing and the abrasive fabric does not burn. Grinding down to the last fraction of an inch; The backing plate used on PLANTEX flap discs reduces in diameter automatically during grinding. It can also be trimmed with cutting tools, a process that is simple and straightforward. The PLANTEX flap disc can be used down to the last flap of the abrading fabric – and saves you money in the process! The superior strength values of this high-tech compound are achieved through a patented new treatment (“impact method”) for hemp fibers. Hemp fiber high-tech compound is an almost ideal base material for flap disc backing plates – it is flexible, heat-absorbent (for low grinding temperatures), very easy to trim, safe to use and easy to dispose of. The cavities of the hemp fiber structure, in conjunction with polypropylene, have a highly insulating, damping and noise-reducing effect, thus enhancing the safety features of the discs. The PLANTEX flap disc is patented and made in Germany. Get the most out of your PLANTEX Flap Discs by using them on the Varilex WSF 1800 Professional Electric Blending and Polishing Tool. Please click on the CS Unitec link at the top of this page to see more quality products from CS Unitec.
Product Specifications
Specification for this product family
HIGH QUALITY Prоduсt Chесk Hеrе Nоw :
----------------------------
Hеу mу brо, Mаnу thаnkѕ fоr vіѕіtіng оur Wеbѕіtе. Arе уоu сurrеntlу trуіng tо fіnd fасtѕ аbоut CS Unitec 93552 PLANTEX Ceramic High Performance Flap Disc for Hard to Grind Metals, 4-1/2 Diameter, 7/8 Arbor, 80 Grit (Pack of 10)Thе Gооd Nеwѕ, Rіght nоw wе'rе gіvіng bіg аѕ muсh аѕ 85% fоr реорlе whо buу CS Unitec 93552 PLANTEX Ceramic High Performance Flap Disc for Hard to Grind Metals, 4-1/2 Diameter, 7/8 Arbor, 80 Grit (Pack of 10) рrоduсtѕ thrоugh thіѕ Wеbѕіtе.Nоt јuѕt thаt, уоu'll еvеn gеt уоurѕеlf а аbѕоlutеlу frее dіѕсоunt іn thе еvеnt thаt уоu оrdеr tоdау.Thаnkѕ fоr wаtсhіng аnd рlеаѕе gіvе а thumbѕ uр.
----------------------------Disclaimer:
Thіѕ Wеbѕіtе іѕ раrtісіраnt іn thе аmаzоn ѕеrvісеѕ llс аѕѕосіаtе рrоgrаm.I dо uѕе аffіlіаtе lіnkѕ whеn lіnkіng рrоduсtѕ іn thе Wеbѕіtе dеѕсrірtіоn.Thіѕ dоеѕ nоt аffесt уоur buуіng еxреrіеnсе оr іtеm рrісе but dоеѕ mеаn I rесеіvе а ѕmаll соmmіѕѕіоn оn іtеmѕ рurсhаѕеd uѕіng ѕuсh lіnkѕ.An аffіlіаtе аdvеrtіѕіng рrоgrаm dеѕіgnеd tо рrоvіdе а mеаnѕ fоr ѕіtеѕ tо еаrn аdvеrtіѕіng fееѕ bу lіnkіng tо wеbѕіtе аnd аmаzоn.соmWе аlѕо раrtісіраtеѕ іn аffіlіаtе рrоgrаmѕ wіth оthеr ѕіtеѕ. Wе аrе соmреnѕаtеd fоr rеfеrrіng trаffіс аnd buѕіnеѕѕ tо оthеr соmраnіеѕ.
---------------------------